Comments on: DIY LED Plexiglass christmas decorations (PIC version)

By: 10 Merry Circuits to Illuminate Your Holiday – How To : Lifehack

10 Merry Circuits to Illuminate Your Holiday – How To : Lifehack — Sat, 31 Dec 2016 00:11:42 +0000

[…] compared to a threshold value in the firmware. The whole works is powered with a CR2032 coin cell. Boris gives very complete instructions for the project electronics and he also includes G-Code (files with the “.tap” suffix) for the […]

By: tomsk

tomsk — Thu, 15 Dec 2011 09:29:05 +0000

These are really cool. Next step would be to link up to http://www.cheerlights.com

By: Boris Landoni

Boris Landoni — Thu, 15 Dec 2011 07:47:28 +0000

Ops, I add the snow flakes.
I used this endmill:
http://www.cnc-plus.de/product_info.php/language/en/info/p997_vhm-alufraeser—2-schneider—beschichtet.html//XTCsid/abb89c588ac0df170dacd5acec04b240
a KRESS with speed of 17000

By: pma32904

pma32904 — Thu, 15 Dec 2011 06:19:43 +0000

Thanks for sharing your project, this is very cool. I’d like to make some of the snow flakes in your pictures. Any chance you would share the snow flake files? Also what size bit for you use and what RPM and feed rate do you run?

Thanks!

By: hackaholicballa - Lighted acrylic Christmas ornaments

hackaholicballa - Lighted acrylic Christmas ornaments — Thu, 15 Dec 2011 06:04:03 +0000

[…] If you’ve gone to the trouble of building your own CNC mill we know you’re always on the lookout for things to use it for. [Boris Landoni] wrote in with just the thing for the holiday season; a set of lighted acrylic Christmas ornaments. […]

By: Lighted acrylic Christmas ornaments | ro-Stire

Lighted acrylic Christmas ornaments | ro-Stire — Wed, 14 Dec 2011 21:44:28 +0000